HF Radar Current Mapping
Radiated Signal Specifications
- Output Radiated Power: 40 watts average, 80 watts peak
- Operating Frequency Range: Mid Band 24 - 27 MHz
- Modulation Format: Pulsed Swept Frequency CW
- Pulse Width: 100 - 600 µs
- Pulse Repetition Frequency: 800 - 5000 Hz
- Duty Factor: 50%
- Sweep Width: 50 - 150 kHz
- Sweep Repetition Frequency: 2 Hz
- Total Radiated Signal Bandwidth: (at - 20 dB level) 65 - 200 kHz
- Polarization: vertical
- Receiver: SSRX 100A
- Maximum In-band Input Level: 0 dBm
- Impedance: 50 ohm
- Sensitivity: (noise level) -140 dBm in 1 Hz BW
- Required Power: 100-120 v AC, 50-60 Hz, 100 watts (100 volt
- operation must be specified when ordered)
- Design: modular, all solid state three-channel
- Operation: I/Q homodyne
- Output: digital data at 4096 16-bit words/second per channel
- Dimensions: (single chassis) 13H x 49W x 53D cm (5.25H x 19W x 21D in)
- Weight: 14 kg (30 lb)
- Transmit Antenna: SSTA 100 Vertical Fiberglass Whip
- RF Connection: (to Transmitter) Low-loss Co-Ax; Type N connectors
- Height: 5 m (16.5 ft)
- Weight: 1 kg (2.2 lb)